ISO. C. S.r.l. carries out the insulation, which may include bulkheads, bridges and pipes, according to the specifications of its customers. Generally, thermal insulation, acoustic and fire, which may be exposed, under cover, with the defense, reinforced or not, and those of pipes and machinery, reflecting the description that comes here succinctly stated:

The thermal sight is made with panels of glass wool anchored to hooks;

The thermal insulation beneath the coating is performed with the same anchor panels of glass wool covered with pre-glued glass fabric;

The thermal insulation with protection is achieved with defense protecting the panels of glass wool used on a plate and structural reinforcements with a coating of galvanized steel sheet 2 m high attached with rivets to the facility consists of galvanized welded in metal conduit. Above the plate applies a first panel of glass wool and a subsequent coating with fiberglass fabric.

The isolation of type noise, those may be in sight, under coating, reinforced with a view, reinforced in the coating and reinforced defense is achieved by applying the same processes of thermal mineral wool with an interposed foil.

The fire insulation, A/30-A/60 in sight, A/30-A/60 under coating, A/30-A/60 with defense, is made with panels of rock wool wall and ceiling with overlapping tissue density and thickness of glass in accordance with regulatory requirements.

The insulation of piping concerns mainly:

Insulation of Exhaust Gas Pipelines realized with 'application of cups and / or panels of rock wool established by ligation in brick and galvanized iron wire, and, where necessary, harpoons prepared previously. The coating with fiberglass fabric is glued joints to overlap. The surface finish is formed by 2 coats of elastomer type approved;

The isolation of auxiliary machinery which is implemented in the same way except for those parts that require frequent disassembly that are isolated by the construction and arrangement of pillows in place insulation, filled with mineral wool of suitable thickness, coated with fiberglass fabric with application of hooks and plates for easy disassembly. Yet here the surface finish is made with the application of an elastomeric product.

The isolation of piping hot (Services Steam and Condensate, oil, hot water) that is achieved by the application of mold fiberglass coated fiberglass fabric. The surface finish on the tubing is exposed with 2 coats of elastomer type approved. Piping naphtha vapor trail are wrapped with aluminum foil beforehand like "Kraft" at joints overlapped with the next steps already described.

Insulation of pipes cool (sea and fresh water cooling, water white, black, gray) is made of fiberglass fabric wrapped in double layer overlapping joints.